The pump and motor sets were renewed and the valves and pipework rearranged. Control panels and automation were installed, and the station was connected to central monitoring.
See all projectsEngineering for utilities, industry and irrigation
EWA delivers engineering, field automation and central monitoring that raise water and energy efficiency in water transfer systems.
Urban water infrastructure
Drinking-water wells, pumping stations, reservoirs and distribution networks.
Industry and energy
Pump systems for boiler feedwater, process water, cooling and auxiliary plants.
Irrigation and agriculture
Irrigation unions, cooperatives and agricultural pumping stations.
Niğde: the same water, 36% less electricity
At a water transfer rate of 800 m³/h, monthly electricity consumption fell from 1,000,000 kWh to 640,000 kWh.
Monthly electricity use at 800 m³/h
640,000kWh / month
36% less energy for the same water
- 01
Field measurement
Water transfer and electricity use were measured before the upgrade. Today we carry out this step with Aqua Guide.
- 02
Controlled with Metirius
The pumps and reservoirs were connected to local automation.
- 03
Central monitoring
Wells and reservoirs are monitored from the control room on a common infrastructure. Today we deliver this layer with Predixi WIS.
One pumping station, before and after rehabilitation


Four products from the field to the control room
Measurement, field control and central monitoring work together within one project.

Predixi IO
Flexible, adaptable SCADA
Draw your own process screens and bind field signals; alarms, reports and automation in the same project.

Predixi WIS
Water management information system
Production, storage, energy and cost from well to network, by utility, district and station.

Metirius
Field control devices
Local control and measurement for wells, pumps, reservoirs, wastewater and networks.

Aqua Guide
Field measurement app
Record inventory, flow, pressure and energy measurements and prepare data for feasibility studies.
Three ways to work with us, from engineering to operation
Choose the scope you need, from a site survey to long-term operation. Our aim is to reduce water and energy losses through measurement-based improvements.
- Technology and engineering servicesFrom site survey and feasibility to pump selection, mechanical rehabilitation, electrical panels, automation and SCADA integration.
- Turnkey delivery and operationCommissioning, training and maintenance, plus long-term operation with fault tracking and performance management.
- Savings sharingOn suitable projects, the return on investment is tied to the measured energy savings.

What a pump project can deliver
- upper bound of the potential energy-efficiency gain in pump systems
- 30%
- payback from energy savings alone
- 3–4years
- potential water savings through network and pressure management
- ~25%
- potential additional energy savings from reduced pumping
- ~15%
These are potentials. Actual results are verified against a baseline set by the initial measurements and depend on the condition of the system and the scope of work.
References and earlier collaborations
Completed projects for industrial companies, and work for water utilities, municipalities and industry carried out through partnerships and collaborations before the current corporate structure.
Completed industrial projects
Partnerships and collaborations before the current corporate structure
Award-winning energy efficiency projects
Energy efficiency work on pump systems was recognised at the Sustainable Business Awards two years running.
Let’s look at what your plant needs.
One well, one pumping station or the whole network: in the first meeting we go through your current readings and your targets.































